Anatomy-mimetic design preserves natural kinematics of knee joint in patient-specific mobile-bearing unicompartmental knee arthroplasty.
PMID 31123794 · Knee surgery, sports traumatology, arthroscopy : official journal of the ESSKA · 2020 · DOI 10.1007/s00167-019-05540-0
Authors: Yong-Gon Koh; Jin-Ah Lee; Hwa-Yong Lee; Heoung-Jae Chun; Hyo-Jeong Kim; Kyoung-Tak Kang
Abstract
This study aims to evaluate whether different tibial-femoral conformities for patient-specific mobile-bearing unicompartmental knee arthroplasties (UKAs) preserve natural knee kinematics, using computational simulations. Different designs for patient-specific mobile-bearing UKAs were evaluated using finite element analysis. Three designs for the identical femoral component were considered: flat (non-conforming design), anatomy-mimetic, and conforming for the tibial insert. The conforming design for the patient-specific mobile-bearing UKAs exhibited a 1.2 mm and 0.7° decrease in the translation and rotation, respectively, in the swing phase compared with those of the natural knee. In addition, the femoral rollback and internal rotation were 2.6 mm and 1.2° lower, respectively, than those of the natural knee, for the conforming design under the deep-knee-bend condition. The flat design for the patient-specific mobile-bearing UKAs exhibited a 2.2 mm and 1.4° increase in the femoral rollback and rotation compared with the natural knee under the deep-knee-bend condition. The anatomy-mimetic patient-specific mobile-bearing UKAs best preserved the natural knee kinematics under the gait and deep-knee-bend loading conditions. The kinematics of the loading conditions in patient-specific mobile-bearing UKAs was determined to closely resemble those of a native knee. In additional, by replacing the anatomy-mimetic design with a mobile-bearing, natural knee kinematics during gait and deep-knee-bend motions is preserved. These results confirm the importance of tibiofemoral conformity in preserving native knee kinematics in patient-specific mobile-bearing UKA.
Arthroplasty, Replacement, Knee; Biomechanical Phenomena; Computer Simulation; Femur; Finite Element Analysis; Gait; Humans; Knee Joint; Knee Prosthesis; Patient-Specific Modeling; Posture; Prosthesis Design; Range of Motion, Articular; Tibia
Cite
Yong-Gon Koh; Jin-Ah Lee; Hwa-Yong Lee; Heoung-Jae Chun; Hyo-Jeong Kim; Kyoung-Tak Kang. Anatomy-mimetic design preserves natural kinematics of knee joint in patient-specific mobile-bearing unicompartmental knee arthroplasty. Knee surgery, sports traumatology, arthroscopy : official journal of the ESSKA (2020). PMID 31123794. DOI 10.1007/s00167-019-05540-0.